Kits & Components
See the component
descriptions below |
Click
on pic |
Cost |
|
Universal
Dual Sport Kit 1 - full kit
Mini Handlebar switch with full wire harness
#1
Headlight #3
Taillight / license plate holder #4
Mini turn signals #5 |
Hydraulic brake light
switch #6
Folding mirror and mount #7
Turn signal flasher #8
Key switch #9 & Horn #10 |
|
 |
$309.95 |
|
Universal
Dual Sport Kit 2 (If you want to use your own headlight)
Mini Handlebar switch with full wire harness
#1
Taillight / license plate holder #4
Mini turn signals #5
Hydraulic brake light
switch #6
|
Folding mirror and mount #7
Turn signal flasher #8
Key switch #9
Horn #10 |
|
 |
$269.95 |
|
Universal
Dual Sport Kit 3
(For those who want to design and build their own harness)
Mini Handlebar switch #2
Headlight #3
Taillight / license plate holder #4
Mini turn signals #5 (or 5a)
|
Hydraulic brake light
switch #6
Folding mirror and mount #7
Turn signal flasher #8
Horn #9
|
|
 |
$189.95 |
|
Universal
Dual Sport Kit 4 - (no harness or headlight)
Mini Handlebar switch #2
Taillight / license plate holder #4
Mini turn signals #5 (or 5a)
Hydraulic brake light
switch #6
|
Folding mirror and mount #7
Turn signal flasher #8
Horn #9
|
|
|
$149.95 |
|
LED
Upgrade
Upgrade any of the above Dual Sport kits to include the Mini 12v LED turn signals and
LED taillight/brakelight instead of the standard incandescent units. Includes
LED type turn signal flasher. See below in 'more useful parts' for
individual component descriptions and pictures. (For bikes with DC battery systems
only)
|
|
$35.00 |
|
Flush mount turn signal
Upgrade
Upgrade Dual Sport kits # 1 or # 3 to include UFO
headlight and taillight with flush mount type turn signals. See below in
'more useful parts' for
individual component descriptions and pictures. |
|
$60.00 |
|
|
|
#1
WIRE HARNESS with Mini Handlebar Switch & Power/Kill Key Switch
Our own wiring harness designed to work
with our kit components and fit any motorcycle that has power for
lights.
Connects handlebar combination switch to power, flasher, turn signals,
horn, brake light switch, tail light, brake light, high & low
beams. Power/kill key switch shuts off power and activates bikes kill
circuit. Designed to work with AC lights or DC battery systems. Basic instructions included.
|
|
$179.95 |
|
#2 MINI COMBINATION SWITCH
Only 1 3/16" wide. Operates turn signals,
horn, headlight high/low/off, blue LED high beam
indicator.
Includes 20" wire pigtail. When used on battery powered systems
this switch will require an additional shut-off switch. We recommend the
#9 Power/kill switch. Additional switch is not needed on AC
systems.
0616-0036 |
|
$49.95 |
|
#3
DUALSPORT
12V HEADLIGHT
Has high and low beams. The standard dualsport kit comes with a WHITE
headlight shell. Also available in red, green, black, blue,
or yellow. If you want a color other than white enter your color choice
in the comments box during checkout or send an email
after placing your order. CE approved Not DOT 2001-0041
|
|
$54.95 |
|
#4
TAILLIGHT & LICENSE PLATE HOLDER
Tail light, Brake light, License plate light & plate holder
Attaches to the underside of MX style rear fenders. We also have XR
style taillights (see further down on this page) CE approved Not
DOT
2010-0035
|
|
$34.95 |
|
#5
MINI TURN SIGNALS 4/pack
These signals have short rubberized flexible stems, bright 23w halogen bulbs
and
a small indicator lens on the back of
the turn signal body (click on the pic).
Only 3 3/4" long. Not DOT |
|
$27.90 |
|
#6
HYDRAULIC
BRAKE LIGHT SWITCH
Replaces one of the banjo bolts in your brake system.
We like to use the one that connects the brake hose to the rear master
cylinder near the brake pedal. 10 X 1.25 thread. Fits most Japanese models. If you
need one for a model with Brembo (most European) or Tokiko (some
Suzuki) brakes and 10 X 1.00 thread see
the listing further down on this page. |
 |
$16.95 |
|
#7
DUAL
SPORT FOLDING MIRROR
One folding mirror. Includes handlebar mount.
Can be used on left or right side. |
 |
$24.95 |
|
#8
Universal 12V turn signal flasher
Works on AC or DC
|
|
$9.95 |
|
#9 Power and Kill
Key Switch
On position connects power (lights etc.)
Off position activates kill switch circuit 150-50 |
 |
$36.95 |
|
#10
12V
HORN
Small 2 3/4" diameter motorcycle horn. Works on AC
or DC.
|
|
$9.95 |
|
|
More useful parts |
| VAPOR
Tachometer / Speedometer
|
|
$115.95 |
click
for more
info |
UFO
HEADLIGHT with flush mount turn
signals. Headlight is DOT approved.
The standard headlight shell is White. Also available in black,
blue or orange. If you want a color other than white
enter your color choice in the comments box during checkout or send an email
after placing your order. Does not come with the black vinyl
background
12-214-29 |
|
$89.95 |
|
BAJA DESIGNS
HEADLIGHT DOT approved, 60/55 watt halogen bulb.
The standard headlight shell is Red. Also available in white,
black, blue, yellow, or orange. If you want a color other than
white enter your color choice in the comments box during checkout or
send an email
after placing your order. |
 |
$89.95 |
|
UFO
TAILLIGHT with flush mount turn
signals
Tail light, brake light, license plate light & plate holder.
Taillight is DOT approved.
Attaches to the underside of MX style rear fenders
12-212-12 |
|
$79.95 |
|
COMBINATION SWITCH
Operates turn signals,
horn, headlight high/low/running/off, kill button. Blue LED high beam
indicator.
Includes wire pigtail with male & female 9-pin plug connectors.
1.75 inches wide 2106-0010 |
|
$59.95 |
|
12 VOLT
REGULATOR / RECTIFIER
Convert your AC headlight output to charge a 12 volt
battery. Handles up to 200 watts. Yellow wires go to lighting coil,
black to ground, red to battery positive.
Must be connected to a battery to function properly. 12-3090A |
|
$45.95 |
|
12 VOLT SEALED BATTERY
Small 12 volt 1.3 amp hour sealed battery
Dimensions: 1.7" X 2.0" X 3.8" Weighs only 20
ounces.
UB1213
|
|
$29.95 |
|
12V AC HEADLIGHT REGULATOR
Protects AC lights from high voltage blowouts in systems with no
battery 2112-0090 |
|
$19.95 |
|
'Crash Advantage' LED
TURN SIGNALS from Electrosport
These bright LED turn signals will bend more than 90 degrees without
damage. Only 2 1/2 inches long. Requires LED flasher or LED turn signal
resistors to flash properly. Sold in pairs. Not DOT ES-181 |
 |
$29.95 |
|
Baja
Designs DOT approved TURN SIGNALS
Sold in pairs 05-9071 |
|
$36.95 |
|
MINI 12V L.E.D. TURN SIGNALS 4/pack
Clear lens, amber LED type lights. Short flexible stems. Very small,
only 2 7/8" long. Requires LED flasher or LED turn signal resistors to
flash properly. Sold as a set of 4. Not DOT
60-1427
|
|
$47.90 |
|
DMP
Flushmount LED turn signals
Requires LED flasher or LED turn signal resistors to flash properly.
Sold in pairs. Not DOT 60-1924A
|
|
$29.95 |
|
LED 12V turn signal flasher
Works with LED type turn signals. For DC systems only.
2106-0052
|
|
$19.95 |
|
LED turn
signal resistor kit
Allows LED type turn signals to flash using a standard flasher
unit. Sold in pairs with connectors included.
10-1398 |
|
$21.95 |
|
LED Taillight
/ Brakelight
BD LED Tail light, Brake light, License plate light).
Attaches to the underside of MX style rear fenders. Small and good
looking!
Not DOT
059072 |
|
$59.95 |
|
LED Taillight
/ Brakelight
Tail light, Brake light, License plate holder (no plate light).
Attaches to the underside of MX style rear fenders. Small and good
looking!
Not DOT
2010-0037 |
|
$34.95 |
|
XR Style Taillight
Tail
light, Brake light, License plate light.
Attaches to the top side of enduro style (XR, KDX, etc) rear fenders.
If you order one of our kits but want this XR taillight, we will be
happy to substitute it for the standard light. Just email after
your order to let us know. Dimensions:
2 3/4" x 4 3/4" x 2 1/2" tall. Not
DOT
M5200
|
|
$29.95 |
|
WPS
Dualsport Taillight
Tail
light, Brake light, License plate light.
Attaches to the top side of enduro style (XR, KDX, etc) rear fenders.
If you order one of our kits but want this small dualsport taillight, we will be
happy to substitute it for the standard light. Just email after
your order to let us know. Dimensions:
2
3/8" x 4 3/4" x 1 3/4" tall. Not
DOT 60-1455 |
|
$19.95 |
|
Hydraulic
brake light switch for Brembo systems
10 X 1.00 thread. Replaces one of the banjo bolts in your brake system.
Fits models with Brembo (many European models) or Tokiko (some Suzuki)
brakes. If you order one of our kits
but want this 10 X 1.00 thread switch , we will be happy to substitute
it for the 10 X 1.25 thread switch. Just email after your order to let
us know. 1200111 |
|
$16.95 |
|
Mechanical
brake light switch for drum brakes
One end clamps on to brake rod and other end to frame rail. If you
order one of our kits but want this mechanical switch , we will be
happy to substitute it for the hydraulic switch. Just email
after your order to let us know. 56-4250 |
 |
$16.95 |
|
OE
style Mechanical
brake light switch
Factory 'original equipment' type mechanical brake switch.
Switch body fits in through a bracket (not supplied but some bikes such
as TTR230s have one) spring hook attaches to pedal or linkage, etc. We will be
happy to substitute this for the hydraulic switch in any of our
kits. Just email
after your order to let us know. 12-0001 |
 |
$16.95 |
|
| Replacement
23watt halogen bulbs
for mini turn signals (5 pack) 60-1377 |
 |
$9.95 |
|
Mirror
Mount
Replaces the clamp on your clutch or brake lever holder. 56-9807 |
 |
$16.95 |
|
#9 Power and Kill
Key Switch
On position connects power (lights etc.)
Off position activates kill switch circuit 150-50 |
|
$36.95 |
|
Key
Kill Switch
Install on any bike. Key operated kill switch. Disables ignition system when key is 'off'.
Connects only to kill switch wires. 05-9168 |
 |
$29.95 |
|
Windscreen
10"x13" clear, quick release mounting
Clamps fit standard 7/8" handlebars. Not for tapered handlebars HD3C |
 |
$78.95 |
|
Windscreen
10"x13" dark tint, quick release mounting
Clamps fit standard 7/8" handlebars. Not for tapered handlebars HD3DS
|
 |
$78.95 |
|
Dualsport Tank Bag
Durable black saddlebags keep your gear close at hand in 2 zippered
compartments, Simple to install - unscrew the gas cap drop the bag
into place and screw it back on, Insulated exterior pocket holds a
1liter water bottle a mesh pocket inside tucks away wallets and keys,
600D polyester pack cloth is coated for water resistance; bag is
equipped with storm flaps and deluxe zipper pulls, One size fits most
ATVs motorcycles and snowmobiles; includes optional Velcro type
fasteners to secure bag to sides of gas tank. sb-6b |
 |
$29.95 |
|
